Enable IPv6 on HPE Networks Apstra Data Center Director ZTP Server

Starting in Apstra DC Director 6.2, you can enable ZTP with DHCPv6 on your ZTP server. This feature is only available on devices that are running Junos EVO.

Before you start, configure the following tasks:

1. Set up the ZTP VM.

   Download and Deploy HPE Networking Apstra Data Center Director ZTP Server VM

2. Configure Static IPv6 Adress.

   Configure Static Management IP Address for HPE Networking Apstra Data Center Director ZTP Server

3. Enable DHCPv6 Service

   Enable DHCP Options for HPE Networking Apstra Data Center Director ZTP Server

4. Configure DHCPv6

   Configure DHCPv4 and DHCPv6 Server for HPE Networking Apstra Data Center Director ZTP