Viewing Tunnels Through a Link

Right-click on a link on the map or in the Network Info window with a planned utilization greather than 0 and select View>Tunnels on/thru Link.

The example below shows tunnels through the CHI-WDC link. Select the Actions menu at the upper rightto further filter the tunnels according to direction.

Figure 1: Tunnels through Link Window Network management software interface showing Tunnels tab with tunnel details like ID, nodes, IPs, bandwidth, and route. Summary section shows total bandwidth info.

Network management software interface showing Tunnels tab with tunnel details like ID, nodes, IPs, bandwidth, and route. Summary section shows total bandwidth info.