Static Routes (SRX Only)

When configuring an SRX, as your WAN Edge device, you can add static routes to your hub, spoke, or standalone configuration.

Add a Static Route

  1. Navigate to the hub profile, WAN Edge template, or device.
  2. In the Static Routes section, click Add Static Route.
  3. Select Network or Prefix to define this route.

    • Network—Define the route by selecting a network and entering the gateway IP address.

    • Prefix—Define the route by entering the prefix and the gateway IP address.

  4. Click Add.
  5. Click Save at the top-right corner of the configuration page.