The following example shows the creation of an interface
set for aggregated Ethernet interfaces in a static Ethernet configuration.
To configure interface sets for aggregated Ethernet (AE)
interfaces created under static configurations:
- Create the AE interfaces.
[edit]
user@host# show chassis | display set
set chassis aggregated-devices ethernet device-count 10
- Configure the AE physical interfaces and member links.
user@host# show interfaces | display set
set interfaces ge-5/2/0 gigether-options 802.3ad ae0
set interfaces ge-5/2/1 gigether-options 802.3ad ae0
set interfaces ae0 hierarchical-scheduler maximum-hierarchy-levels 2
set interfaces ae0 flexible-vlan-tagging
set interfaces ae0 unit 0 vlan-id 100
set interfaces ae0 unit 1 vlan-id 101
set interfaces ae0 unit 2 vlan-id 102
set interfaces ae0 unit 3 vlan-id 103
set interfaces ae0 unit 4 vlan-id 104
- Configure the interface set.
set interfaces interface-set ifset1-ae0 interface ae0 unit 0
set interfaces interface-set ifset1-ae0 interface ae0 unit 1
- Configure class-of-service parameters for the interface
sets.
set class-of-service interfaces interface-set ifset1-ae0 output-traffic-control-profile tcp
Note: You also need to configure the parameters of the traffic
control profile. For more information, see the Related Documentation
section on this page.
- Configure scheduler mode.
set class-of-service interfaces ae0 member-link-scheduler scale