uplink-port-group (Junos Fusion)
Syntax
uplink-port-group group-name;
Hierarchy Level
[edit policy-options satellite-policies candidate-uplink-port-profile profile-name] [edit policy-options satellite-policies candidate-uplink-port-profile profile-name term term-name from]
Description
In Junos Fusion configuration, assign an uplink port group to a candidate uplink port policy.
An uplink port group defines a set of candidate uplink ports that are assigned to satellite devices to which the candidate uplink port group is assigned.
The physically connected uplink ports on a satellite device must be defined as candidate uplink ports in the Junos Fusion configuration. If the uplink ports on a satellite device are not configured as candidate uplink ports, uplink failure detection cannot be enabled on the device, and a system log message is generated.
Uplink port groups are defined under [edit policy-options
satellite-policies port-group-alias].
Default
Each satellite device model has a set of default uplink ports (see Overview of Uplink Failure Detection on a Junos Fusion). You only need to assign an uplink port group to a satellite device if you do not want to use the default uplink ports.
Options
| group-name | The name of the port group to assign. |
Required Privilege Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Release Information
Statement introduced in Junos OS Release 14.2R3.