Maintaining the SRX1500 Components
Required Tools and Parts for Maintaining the SRX1500 Services Gateway
The following tools and parts are required to maintain the hardware components of the services gateway:
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD) grounding wrist strap
Flat-blade screw-blade screwdriver, approximately 1/8 in. (3 mm)
Phillips (+) screwdrivers, numbers 1 and 2
Routine Maintenance Procedures for the SRX1500 Services Gateway
For optimum performance of the services gateway, perform the following preventive maintenance procedures regularly:
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
Make sure that airflow is unobstructed around the services gateway and into the air intake vents.
Check the status LEDs on the front panel of the services gateway.