Agency Approvals for PTX10002-60MR

Agency Approvals

Safety

  • IEC 62368-1:2014 (All country deviations): 2nd Edition: CB Scheme

  • IEC 62368-1:2018 (All country deviations): 3rd Edition: CB Scheme

  • IEC 62368-1:2023 (All country deviations): 4th Edition CB Scheme

  • UL 62368-1:2025 (4th Edition)

  • CSA C22.2 No. 62368-1:2025 (4th Edition)

  • UL 60950-1:2007

  • CAN/CSA C22.2 No. 60950-1-07+ A1:2011+A2:2014

  • CFR, Title 21, Chapter 1, Subchapter J, Part 1040

  • REDR c 1370 OR CAN/CSA-E 60825-1- Part 1

  • IEC 60825-1

  • IEC 60825-2

  • IEC/UL/CSA 62368-1

EMC Requirements (Global)

  • FCC 47 CFR Part 15

  • ICES-003 / ICES-GEN

  • BS EN 55032

  • BS EN 55035

  • ·EN 300 386 V1.6.1

  • EN 300 386 V2.2.1

  • BS EN 300 386

  • EN 55032

  • CISPR 32

  • EN 55035

  • CISPR 35

  • IEC/EN 61000 Series

  • IEC/EN 61000-3-2

  • IEC/EN 61000-3-3

  • AS/NZS CISPR 32

  • VCCI-CISPR 32

  • BSMI CNS 15936

  • KS C 9835 (Old KN 35)

  • KS C 9832 (Old KN 32)

  • KS C 9610

  • BS EN 61000 Series

  • NEBS GR-1089-CORE, Issue 8

Energy Efficiency Requirements

  • AT&T TEER (ATIS-06000015.03.2013)

  • ECR 3.0.1

  • ETSI ES 203 136 (2013-05)

  • Verizon TEEER (VZ.TPR.9205 Issue 6)

Compliance Statements for NEBS

  • The equipment is suitable for installation as part of the Common Bonding Network (CBN).

  • The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.

  • The battery return connection is to be treated as an isolated DC return (i.e.DC-I), as defined in GR-1089-CORE.

  • You must provision a readily accessible device outside of the equipment to disconnect power. The device must also be rated based on local electrical code practice.

  • For Juniper Networks systems with AC power supplies, an external surge protective device (SPD) must be used at the AC power source.