Protocols and Applications Supported by the MS-MIC and MS-MPC

Table 1 contains the first Junos OS Release support for protocols and applications on the MX104, MX240, MX480, MX960, MX2010, and MX2020 Multiservices MIC (MS-MIC) and Multiservices MPC (MS-MPC). A dash indicates that the protocol or application is not supported.

Table 1: Protocols and Applications Supported by the MS-MIC and MS-MPC

Software Feature

First Supported Junos OS Release

GRE Key

–

GRE dont-fragment

–

HTTP redirect services

15.1R4

Stateful firewall

13.2R4

Network Address Translation (NAT) for IP addresses

13.2R4

Port Address Translation (PAT) for port numbers

13.2R4

IP Security (IPSec) encryption

13.2R4

Flow aggregation

–

Active flow monitoring exports cflowd version 5 and version 8 records

–

Active flow monitoring exports flow monitoring version 9 records, based on RFC 3954

13.2R4

Graceful Routing Engine Switchover (GRES)

13.3

Note:

GRES is not supported for MS-MIC on MX104 router.

Passive flow monitoring

–

Passive flow collection

–

Flow-tap

–

Dynamic flow capture

–

Real-time performance monitoring

13.3

Link Services

–

MX Series Virtual Chassis with stateful firewall

14.2

MX Series Virtual Chassis with IPv4-to-IPv4 basic NAT, dynamic NAT, static destination NAT, dynamic NAT with port mapping, and stateful NAT64

16.1R4 and 18.3R1. Starting in Junos OS Release 18.4R1, these features are supported on the MX Series Virtual Chassis for the Juniper broadband network gateway (BNG).

MX Series Virtual Chassis with DS-Lite

18.4R1

Traffic sampling

13.2R4

Tunnel services:

  • IP-IP unicast tunneling

  • GRE unicast tunneling—Supports GRE fragmentation

  • Protocol Independent Multicast (PIM) sparse mode unicast tunneling

–

Virtual tunnel interface for Layer 3 VPNs

–

Layer 2 Tunneling Protocol (L2TP)

–

Voice services:

  • Compressed Real-Time Transport Protocol (CRTP)

–

Encapsulations:

  • Multilink Frame Relay (MLFR)

  • Multilink Point-to-Point Protocol (MLPP)

–

Related Documentation