Cabling a CTP151 Interface Module

To install a cable in an interface module:

  1. Wrap and fasten one end of the ESD grounding strap around your wrist and connect the other end to a site ESD point.
  2. For the T1/E1 interface module, slide the cable as far as you can into the T1/E1 interface module until it clicks into place.

    For the serial/multiservice interface module, push the serial HD-26 cable into the module, and tighten the thumb screws.

  3. Gently pull the cable to confirm that it is inserted correctly.

For more information about CTP151 cable and pinout specifications, see Cable Specifications for Console Connections for the CTP151 Device.

Related Documentation