Medical

  1. Equipment not suitable for use in the presence of flammable mixtures.

  2. Connect to only IEC 62368-1 or IEC 60601-1 certified products and power sources. The end user is responsible for the resulting medical system complies with the requirements of IEC 60601-1.

  3. Wipe with a dry cloth, no additional maintenance required.

  4. No serviceable parts, the unit must be sent back to the manufacturer for repair.

  5. No modifications are allowed without approval from HPE Networking.

CAUTION

  • Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally.

  • Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this equipment could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in improper operation.

  • Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the access point. Otherwise, degradation of the performance of this equipment could result.
NOTE

  • This device is intended for indoor use in professional healthcare facilities.

  • This device has no IEC/EN60601-1-2 essential performance.

  • Compliance is based on the use of HPE Networking approved accessories. Refer to the ordering guide for this access point at https://www.arubanetworks.com